This is part of The Pile, a partial archive of some open source mailing lists and newsgroups.
Subject: Re: scsi Syjet mount[SOLVED] From: "eric clover" <dogface@nnex.net> Date: Tue, 13 Jun 2000 11:40:55 -0500 Subject: Re: scsi Syjet mount > On Tue, 13 Jun 2000, Eric Clover wrote: > > hello, i have an external 50pin scsi Syquest 1.5gig Syjet, it is on its > > own isa advansys scsi card. the card is one of two scsi cards on the > > box. the other scsi card is an adaptec 68pin with 2 5gig hd's. the > > adaptec 68pin scsi card (which i will call sg0) works fine. the other > > scsi card (the isa 50pin advansys scsi card, which i will call sg1) > > works from what i can tell from the scsi card bios upon bootup. with all > > that said, how can i scan the bus to see if the sg1 is working and that > > the syjet is operational? sg1 does not show up in /proc/interrupts. > > might i have to somehow add a module somewhere before it works?? if so, > > how/what do i have to do? do isa cards need both irq's and dma's? and is > > there a way to scan to see if sg1 is working?? i used cdrecord -scanbus > > but it will only scan scsi0. > > help please > > > As root type "modprobe <modulename>" I'm not sure what > module you'll use, but it'll be an Advansys driver module. > That *should* do it. > John > Woo!! she'sa workin'! thanks John ===