This is part of The Pile, a partial archive of some open source mailing lists and newsgroups.
Subject: SCSI Bus errrs on 6.1 From: Kyle Hargraves <kh@nelson.hedland.edu.au> Date: Tue, 7 Mar 2000 17:31:35 +0800 (WST) hi, Has anyone seen anything like this previously - and if so what is the problem ? The termination does seem ok ! Mar 5 04:04:11 localhost kernel: scsi : aborting command due to timeout :pid 272041, scsi0, channel 0, id 0, lun 0 Read (6) 10 33 f7 68 00 Mar 5 04:04:11 localhost kernel: SCSI host 0 abort (pid 272041) timed out - resetting Mar 5 04:04:11 localhost kernel: SCSI bus is being reset for host 0 channel 0. Mar 5 04:04:11 localhost kernel: SCSI host 0 channel 0 reset (pid 272041) timed out - trying harder Mar 5 04:04:11 localhost kernel: SCSI bus is being reset for host 0 channel 0. Mar 5 04:04:11 localhost kernel: (scsi0:0:0:0) Performing Domain validation. Mar 5 04:04:11 localhost kernel: scsi : aborting command due to timeout : pid 272044, scsi0, channel 0, id 1, lun 0 Write (10) 00 00 b9 92 64 00 00 30 00 Mar 5 04:04:11 localhost kernel: SCSI host 0 abort (pid 272041) timed out - resetting Mar 5 04:04:11 localhost kernel: SCSI bus is being reset for host 0 channel 0. Mar 5 04:04:11 localhost kernel: SCSI host 0 channel 0 reset (pid 272041) timed out - trying harder Mar 5 04:04:11 localhost kernel: SCSI bus is being reset for host 0 channel 0. Mar 5 04:04:11 localhost kernel: SCSI host 0 reset (pid 272041) timed out again - Mar 5 04:04:41 localhost kernel: probably an unrecoverable SCSI bus or device hang. Mar 5 04:04:41 localhost kernel: (scsi0:0:0:0) Successfully completed Domain validation. Mar 5 04:04:41 localhost kernel: (scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 15. Mar 5 04:04:41 localhost kernel: (scsi0:0:1:0) Synchronous at 80.0 Mbyte/sec, offset 15. Mar 5 04:04:41 localhost kernel: (scsi0:0:0:0) Performing Domain validation. Mar 5 04:04:41 localhost kernel: (scsi0:0:0:0) Successfully completed Domain validation. Mar 5 04:04:41 localhost kernel: scsi : aborting command due to timeout : pid 272075, scsi0, channel 0, id 0, lun 0 Read (10) 00 00 21 00 05 00 00 08 00 ===